CellTank-34 in use on any PCS

150 ml CellCore prep for CellTank-34 

Design of the CellCore concept as used also in CellTank took place from 2008 to 2014.

CellTank-34 as a prototype used a standard OD 137 mm beaker and nylon 3D printed parts. Thousands of hours was invested in design and testing. All design work performed in SolidWorks and with FluidWorks/Cosmos for the CFD analysis.

The idea came through our many years of work with porous materials for filtration purposes. Controlled filtration efficiency not being closed to 100% but much lower was the key to harbour both suspension and adherent mammalian cells.

 

D3C_3340.JPGD3C_3571.JPGD3C_3998.JPGD3C_3687.JPG2xCellTank#2202-luer-A.JPG