CellTank-34 in design

150 ml CellCore prep for CellTank-34

Design of the CellCore concept as used also in CellTank took place from 2008 to 2014.

CellTank as early prototypes used a standard 2 litre beaker and lots of 3D printed parts. Thousands of hours was invested in design and testing. All design work performed in SolidWorks and with FluidWorks/Cosmos for the CFD analysis.

The idea came through our many years of work with porous materials for filtration purposes. Controlled filtration efficiency not being closed to 100%, but much lower was the key to harbour both suspension and adherent mammalian cells.

 

Nalgene 4 litre_02 JPG_01.JPG2011-09-14 14-09-20_0893.jpgCerTank Dual_07 PDF_01.jpgCellTank-sensors.jpgCellTank 2202_01 JPG_01.JPG

 

Latest CellTank-34 and CellTank-35 (from 2018) integrated into the standard OD 137 mm vessel of in-house design and manufacturing.